Recharge the NiCad battery pack on your Air-Mate PAPR with one of 3M’s SmartCharger Battery Chargers.

A compact and lightweight PAPR System that won’t get in the way of the worker wearing it.

Before you choose your 3M™ Belt-Mounted PAPR Assembly, you should choose either the lightweight, 40" H-115 Breathing Tube, the 36" GVP-122 Reusable Breathing Tube, or the GVP-123 Breathing Tube (for use with the 3M™ Full Facepiece 7800S).

The Breathe Easy Respiratory System offers efficient air-purifying protection against gases, vapors and particulates. The 5 Unit System allows for customized parts selection. Simply choose a helmet, a breathing tube, a turbo assembly, a cartridge/filter, and a battery charger.

The Breathe Easy Respiratory System offers efficient air-purifying protection against gases, vapors and particulates. The 5 Unit System allows for customized parts selection. Simply choose a helmet, a breathing tube, a turbo assembly, a cartridge/filter, and a battery charger.

The 3M Belt-Mounted Powered Air Purifying Respirator takes contaminated air and uses a motorized blower to force it through a filter/cartridge assembly, purifying the air and delivering it to the hood. The blower runs on batteries and is mounted to the user's belt, giving that worker greater mobility and the ability to operate in a wide variety of environments. To assemble your own custom-designed system, simply follow these four steps: Choose a Head Assembly; Choose a Breathing Tube; Choose a PAPR Assembly; and Choose a Cartridge/Filter.

The 3M Belt-Mounted Powered Air Purifying Respirator takes contaminated air and uses a motorized blower to force it through a filter/cartridge assembly, purifying the air and delivering it to the hood.

The Breathe Easy Respiratory System offers efficient air-purifying protection against gases, vapors and particulates. The 5 Unit System allows for customized parts selection. Simply choose a helmet, a breathing tube, a turbo assembly, a cartridge/filter, and a battery charger.

The Breathe Easy Respiratory System offers efficient air-purifying protection against gases, vapors and particulates. The 5 Unit System allows for customized parts selection. Simply choose a helmet, a breathing tube, a turbo assembly, a cartridge/filter, and a battery charger.

The GVP-1 Belt-Mounted Assembly includes a motor blower, battery pack, charger, flow meter, power cord, blower plugs, and web belt.

The Full Mask Respirator is made of silicone rubber and will hold its shape in extreme hot and cold environments. Features a double-sealing flange, deep chin pocket, a replaceable, distortion-free polycarbonate lens with antifog, antiscratch coating and a comfortable, removable hairnet.

The GR50 Series Respirator with Grinding Hood Helmet protects the entire head, face and neck and is designed for use while grinding, brazing or metalworking.

The CC20 Series Respirator with Spray Painting Helmet is ideal for spray painting, chemical handling and pharmaceutical manufacturing because it protects the worker's entire head, face and neck from airborne contaminants.

Use the 88 Series Respirator with Abrasive Blasting Helmet to protect the head, neck and torso from abrasive rebound during blasting operations.

The system provides ambient air to one worker. Comes complete with Tyvek hood, hose, and an ambient air pump. The lightweight disposable hood is loose-fitting, making it especially comfortable for bearded workers.

The Half Mask Respirator has a low profile. Features an over-the-shoulder hose, collar clip and adjustable belt.

The system provides a portable source of ambient air for one worker. System comes complete with comfortable, full or half facepiece supplied air respirators and an ambient air pump. The respirators feature an over-the-shoulder hose that clips to the collar and an adjustable waist belt with a clip that holds the lower section of air hose out of the way.

The system provides a portable source of ambient air for three workers. System comes complete with comfortable, full facepiece supplied air respirators and an ambient air pump. The respirators feature an over-the-shoulder hose that clips to the collar and an adjustable waist belt with a clip that holds the lower section of air hose out of the way.

The system provides a portable source of ambient air for two workers. System comes complete with comfortable, full or half facepiece supplied air respirators and an ambient air pump. The respirators feature an over-the-shoulder hose that clips to the collar and an adjustable waist belt with a clip that holds the lower section of air hose out of the way.

The Supplied Air System consists of a Hood Assembly, an Air Control Device, and an Air Line Hose. Choose the appropriate model to meet the specific needs of the worker.

Model V-400 is a low-pressure connector assembly for use only with the 3M W-3020 low-pressure hose.

The Model V-100 Vortex Cooling Assembly cools incoming air up to 50 degrees F and allows the wearer to adjust the level of air flow.

The Vortex Cooling Assembly provides cool refreshing air to workers in high heat environments. Compressed air can be cooled as much as 50°F (28°C). It can operate on pressures ranging from 60-90 psig, depending on hose length. It includes the cooler with quick disconnect fitting, waist belt and holder.

The Model V-200 Vortemp can warm incoming air up to 50 degrees and allows the wearer to adjust air flow. Both models require 60-90 psi, depending on the length of the hose used.

Model V-300 regulates the flow of compressed air and allows the user to set the air flow.

The W-5114 Breathing Tube is used with 3M Supplied Air System H-Series Hoods.

The L-122 Breathing Tube is for use with any 3M™ L-Series Headgear.

The Supplied Air System consists of a Hood Assembly, an Air Control Device, and an Air Line Hose. Choose the appropriate model to meet the specific needs of the worker.

3M™ High and Low Pressure Hoses include some of the hoses used on 3M™ Supplied Air Respirator Systems.

The Supplied Air System consists of a Hood Assembly, an Air Control Device, and an Air Line Hose. Choose the appropriate model to meet the specific needs of the worker.

The L-Series is a line of supplied air helmets with facepieces designed to provide both protection and comfort.

The L-Series is a line of supplied air helmets with facepieces designed to provide both protection and comfort.

A durable polyethylene outer shell with a double shroud is ideal for abrasive blasting applications.

The L-Series is a line of supplied air helmets with facepieces designed to provide both protection and comfort.

North Pancake Filter meets NIOSH class P100 requirements by having a minimum efficiency of 99.97% against dust, mist or fumes, oil or non-oil based.

The 3M™Particulate Filter 2071, P95 with Advanced Electret Media technology provides protection in environments where oil, and non-oil based particles are present.

Choose from the 501 or 502 depending on cartridge and filter type required on the facepiece. For more information 3M.com/Occsafety online.

The 3M Particulate Filter 5N11, N95 is NIOSH approved and provides protection against certain non-oil containing aerosols. This P-series filter is appropriate for both oil and non-oil containing environments with extended time-use limitations. For use with 3M 6000, 7000, and FF-400 Series Facepieces.

The North Low Profile Filter/Cartridge gives the same P100 protection in a 45% thinner, 60% smaller size.

Use Advantage Respirator Cartridges in Advantage 200, Advantage 1000 and Advantage 3000 respirators. A wide variety of cartridges are available. Cartridges come two to a pack.

The following cartridges, filters, and accessories are available for Survivair’s S-Series (threaded) Respirators. Comes in Standard, P100 and multicontaminant cartridge/filter combinations.

North Safety Cartridges and Filters provide respiratory protection against a wide variety of industrial air contaminants.

Bayonet-style air purifying cartridge/filter combinations are easy to attach with a simple one-quarter turn.

Vapor Smart Cartridge from Moldex allows you to inventory just one cartridge instead of multiple chemical cartridges.

Choose from a complete line of bayonet-style air purifying cartridges.

North Safety Cartridges and Filters provide respiratory protection against a wide variety of industrial air contaminants.

A wide range of filters and cartridges provide versatile protection for 3M 5000, 6000 and 7000 Series Facepieces and Respirators.

Choose from a complete line of bayonet-style air purifying cartridges and filters. Easy to attach with a simple one-quarter turn.

The GME Super Cartridge provides protection against ten specific gases and vapors simultaneously. Using a prefilter and a cover adds protection against fumes, mists, dusts, pesticides and paints.

3M Cartridge/Filters provide a high level of comfort and exceptional respiratory protection, and offer significant advantages over earlier stacked cartridge/filters.